- Get hold of the certificate for your product.
- Check the issuer of the certificate in the list of accepted certifiers.
- Check the label. For security safes, the label is placed inside the safe.
- Verify the Grade or Class Resistance your product has been certified for.
- Check that the certification number available on the product certificate matches with the one on the label.
- The safes are not anchored: safes that are carrying a grade for burglary protection and which weigh below 1000kg must be properly anchored to the floor or a wall, otherwise the classification is not valid as well as the label inside the safes.
- Unauthorised modifications are made to the safes. Changing the lock, adjusting the boltwork, replacing the seal or adding a deposit slot to burglary- or fire-resistant safes unvalidate the certification and the labels. Therefore, product checks, maintenance and customisation should be carried out by the original supplier or an accredited partner.
- The safes carry out unsufficient lock grade. If a safe is certified for burglary protection, then the lock used on the safe must also be certified as offering an equivalent degree of protection.
Chubbsafes uses independant test institutes that are among the most experienced bodies to ensure that the testing and certification processes are carried out correctly by a trusted and credible organisation:
The table below shows which classification of lock is required for each grade of safes and vaults as per EN standards:
Burglary resistance Grade
(as per EN 1143-1)
|Lock Configuration as per EN 1300|
|Number of locks||Lock Class|
|XI||2 (3)||D (C)|
|XII||2 (3)||D (C)|
More information on other standards, please contact your local Gunnebo.
Send us a request Fill Our Form